139W AMC 8
- Thread starter IntelPennny4
- Start date
- Latest activity Latest activity:
- Replies 46
- Views 8K
The Alaska Mux is there , 16 channels, 7 video, 7 radio, and a couple I'm not sure about.
AK-1
AK-1 DTV
AK-2 (360 North)
AK-3 UATV
AK-3 DTV
APRN ?
ARCS
ARCS DTV
KCAW FM
KMXT
KOTZ
KSDP
KSKA FM
KUAC FM
KUCB
MMX1P6 ??
AK-1
AK-1 DTV
AK-2 (360 North)
AK-3 UATV
AK-3 DTV
APRN ?
ARCS
ARCS DTV
KCAW FM
KMXT
KOTZ
KSDP
KSKA FM
KUAC FM
KUCB
MMX1P6 ??
what is in the Alaska Mux? is transponder 4080 V still there? i cant find anywhere on the web what is on this bird
I guess I don't understand the question. I just listed what channels I found in that mux.
4080 V is not active. this mux is 4056 H 13250
i was just asking why they call it the alaska mux but its ok i looked it up and figured it out. i read some where that the 4080 V was still active they said to try 30000 or 5000. thanks magic
I was thinking that signal may be spot-beamed towards Alaska?
If so you may not be able to get it, depending on your location.
If so you may not be able to get it, depending on your location.
Short for multiplex. A group of channels.
I am sure he did a blind scan. He is right though unless you are in the North West(mainly) you will see nothing.
Nothing currently running at 137W either.
GOES-17 will be moving to 137W late this year. It will replace the current GOES-WEST at 135W. (But its L-Band weather images and data).
well i guess i miss out on the 139w train then o well. i thank you all for posting and helping me out. i be getting another 10 footer soon 
Have approx. 10.5dB SNR on 4056 H 13250 here in Northern California with a 10'. All other transponders are gone.
Titanium, is there any place in your area to purchase C-Band mesh? I have a 10 foot dish that had the crap knocked out of it during a hail storm. The screen has more dimples than a golfball. Big ones, the size of a silver dollar. Thought you might know where it can be purchased.
I buy locally with almost any punch design from a local aluminum supplier/fabricator. Had two panels made a few years ago. Took a piece for him to match and the dimensions. He had the two panels produced within the week. Recall the cost to be about $75 plus 2 hours driving and 6 gallons fuel! 
Have you checked with an aluminum fab shop in your area? Many of these shops are going away since they used to be quite busy with RV panels and the industry is almost all fiberglass now. Check with a RV repair shop. They should have leads on who is still in the business.
Have you checked with an aluminum fab shop in your area? Many of these shops are going away since they used to be quite busy with RV panels and the industry is almost all fiberglass now. Check with a RV repair shop. They should have leads on who is still in the business.
yo vman is this what u be looking for?
If the holes are the right size, yes. Does it come in wider widths? I've never seen that in the stores around here. Did you get this at a big box store like Lowes or Home Depot?
I buy locally with almost any punch design from a local aluminum supplier/fabricator. Had two panels made a few years ago. Took a piece for him to match and the dimensions. He had the two panels produced within the week. Recall the cost to be about $75 plus 2 hours driving and 6 gallons fuel!
Have you checked with an aluminum fab shop in your area? Many of these shops are going away since they used to be quite busy with RV panels and the industry is almost all fiberglass now. Check with a RV repair shop. They should have leads on who is still in the business.
I found some rolled aluminium wide enough to make panels for 7-1/2 foot dishes, which should collect more signal due to the smooth surface, and have a friend with a metal shear, but they cannot get it in widths wide enough for 10 and 12 foot dishes. The dish I have that needs the mesh replaced is a Unimesh and the panels slide into a track rather than being held down with washer head cap screws.
There's a guy here that does special projects, but he doesn't have a supplier for this kind of mesh. I was on Alibaba and found the mesh in China, but the minimum order was 30 rolls, and the freight was over a thousand bucks to get it here. As you might imagine, that's out of the question. I have the money to purchase it, but I don't know what I'd do with 30 five hundred foot rolls.
Similar threads
