This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

922 pros and cons

I understand the ViP922 can go into "IR mode." But can it be controlled by RF from the Harmony 900 or 1100? That might indicate if the XiP813 could be controlled similarly.

I would like to get additional clarification on this. Despite the 722K manual stating that TV2 can operate using IR and/or UHF, it ONLY operates in UHF mode. IR is not available for TV2 (grayed out on receiver).

Does the 922 have the same issues? I would like to use IR for ALL of my receivers/equipement, TV1 and TV2. I have Home Theater Master MX800, MX700 remotes (fully IR programmable). I also have whole-house IR distribution (I can control any device from any room).

1) Can I use IR on both TV1 and TV2 of the 922 with my Home Theater Master Remotes?
2) Does anybody know how to get IR capability on TV2 of the 722K (do I need to buy the IR-to-UHF upgrade, program remote using UHF-to-IR codes, then put the upgrade in the closet to collect dust)?

Thx
 

yes a 21.0 remote will work with it, i have one that works with mine. the only buttons that don't work correctly though on mine are the yellow and blue ones.
 
I would like to get additional clarification on this. Despite the 722K manual stating that TV2 can operate using IR and/or UHF, it ONLY operates in UHF mode. IR is not available for TV2 (grayed out on receiver).
IR is available on TV2 on the ViP722K with a TV2 IR converter. I don't know if it works with the ViP922.

EKB: TV2 IR Converter
 


Ok... I may sound stupid here, but what makes you a Plan A customer? I sit at home with two 722 (no Sling) and have contemplated upgrading to the 922, but can't justify the upfront cost.
 
Ok... I may sound stupid here, but what makes you a Plan A customer? I sit at home with two 722 (no Sling) and have contemplated upgrading to the 922, but can't justify the upfront cost.

The ViP922 has been pulled from the upgrade options at this time due to the Blockbuster Movie Pass not being available at this time. After they get the software upgrade completed it will available again. If you would like to PM me your account information, I can look into this and advise if the option will be available when it is restored as an upgrade option. Thanks!
 
Dammit! I came on here researching today to upgrade, and already sent Zach a PM. Just read the thread again and found out they are not being available
 
Dont sweat it. Check out my thread on the 922 losing timers. There is a major software flaw that has been on the box now for months.

As a DVR this thing is total junk right now...I am about to dump it and I have pretty much loved it for the most part since I got one at launch.
 

I keep reading about this timer issue, recordings disappearing etc. To date mine has worked flawlessly....well the caller id requires a reboot occasionally, but even Sling has been cooperating.

It is odd Dish has yanked the unit from new customers........it has been stated by Reps that this change is because of the BlockBuster software issue. Likely we'll never know for sure.
 
The problem does not appear to be on all units...But there are a few here that have had the problem.

This stinks because my 922 has been working almost perfect too up until this problem.

I am now researching a DirecTV HR34...maybe something else like tivo with cable (yuck!),...I just need something that works. I have missed so many shows already...I only watch DVRed programs I dont have time to watch stuff when it comes on. For the premium we pay for these things it should at least work as it's advertised and record shows when it supposed to.
 
I am wondering if it has to do with timezone, CSI007. Perhaps only units in the Eastern timezone are affected. Or some other common element. Maybe a certain show series that has been set to record. Maybe there is something faulty coming through on the guide that affects the unit, but only for those units that have that series set to record. Just guessing. Wish I could go over to Dish Support and find out.