Thanks Pete! I have 3 Universal LNB's sitting in a box What did you say the limits onthe SG2100 motor are? Was it 70 degrees? If so, I should be able to put my Universal LNB on it and swing the motor over to 58w
If you ever get a chance, try to get CubaVision with your Traxis 3500. I have never had a Universal LNB and the Traxis scanned it right in. I was not able to do that with my Manhattan 1500 or Neusat SP2600, so I'm thinking it is a unique feature of the Traxis 3500.
Cubavision and Cubavision International are also available on the Hispasat satellite at 30ºw with a standard LNB. (For those who can see this satellite)
you should have no issues getting 58W and Cubavision (or as I call it Fidelvision)
just need a Universal set up. I tried it with my Coolsat (pete's trick) but the Coolsat removes the TP when I set the LO back to 10750
Looking at "the" list, it show an lnb lo of 9750. I set my lnb to this. Scanning now. 21/400!
I had scanned it in under the universal setting and no go. I might need to get the primestar out and aim for it. The neighbors tree MIGHT be in the way
Okay you guys peaked my curiosity! I motored the dish over to 30W (since I only have a standard lnb) and scanned away. Nothing came up on the Coolsat using blind scan.
However, when I cycled through the tp listing in the "manual scan" it picked up everything without a hitch.
lol Larry
you will do anything to tinker. I'm still waiting to hear you say you converted one of the bucket mounts into a trailer hitch mount to go behind the Trailblazer. lol
i would try the bucket mounted primestar in a different location to see if you can get a different angle away from the trees and diseqc switch it into your motor system at the pole (between the motor & lnb) that will give you a extension from there.
I just might have to do that this weekend I am going through and re scanning and changing each satellite to UNIV since I switched lnbs. So far every satellite I have gained 6% on the meter.
Larry
change them to 10600 (from 10750) and turn the 22k on....that way when you blind scan you dont have to wait while it scans the low band which only PAS9 has