Houston Tracker III Plus

[elcheca1]

Hi, I have a little problem with my Tracker Locator, when I connect the engine and press the EAST / WEST buttons, it must turn left and right and it does not do anything, the Tracker turns on well but that little option I do not know how to solve it, if someone has passed this please comment please

 

[Titanium]

Are the reed switch sensor wires also connected? The motor M1/M2 wires and the reed switch S1/S2 wires with the shielding drain wire must be connected for the actuator to move.

 

[elcheca1]

Are the reed switch sensor wires also connected? The motor M1/M2 wires and the reed switch S1/S2 wires with the shielding drain wire must be connected for the actuator to move.

all cables are connected, Motor, Sensor

 

[Titanium]

Does the motor move with 12Vdc battery attached to M1/M2 wires?

If the motor moves with 12Vdc battery, place a continuity tester across the S1/S2 leads as the motor moves. Does the continuity meter show open/close cycles?

 

[elcheca1]

Does the motor move with 12Vdc battery attached to M1/M2 wires?

If the motor moves with 12Vdc battery, place a continuity tester across the S1/S2 leads as the motor moves. Does the continuity meter show open/close cycles?

yes, I connect a 12v laptop battery and the actuator works, the problem is in the Tracker, I have not yet tried that of the continuity tester but you think that will help the tracker work?

 

[Titanium]

The continuity tester will indicate if the reed switch is opening and closing as the actuator moves.

 

[elcheca1]

The continuity tester will indicate if the reed switch is opening and closing as the actuator moves.

Well, my friend, I do not know much about that, that he will show me the continuity tester, what reaction he should throw when it comes to doing what you say he does