Wow I go to a Picnic, get sunburn on my bald spot and come home to this.
Some good news (maybe) currently we have lots of coax cables coming in from outside that come up and in our windows.
My wife said that if I clean that up so no more coax is coming in the windows then maybe I will get my wish.
So in my house on the second floor there is a crawl space which runs the length of the house. I mapped things out at the picnic and it looks like I can get rid of all the coax coming in the windows (and there is a lot of it) and that I only need to bring 4 to 5 coax cables in.
So I am planning on making a small hole in the outside wall from the crawl space and bringing those 4 or 5 wires in. What I am wondering is do they make some kind of cover that will shield the hole coming into the house. Something that is slanted like this
|\
| \
| \
| \
| \
I think something like that will make the install look neater and will make it easier to add cables in the future then just drilling holes for each coax in the wall and having the cable come in.
So far I found this but I am not sure now many wires I can fit through it. It also looks like this is made for the inside, and I need something that will work outside.
I found a spool of C/KU Ribbon Cable that someone PMed me about (thank you!) so I am good to go there.
Also for the actuator should I look at ordering a Boot Cover for this like this?
This looks like it could be an exciting project.