Kijiji, eBay, and Craigslist dishes for you to take a look at

10 foot mesh satellite dish with H to H motor and 'box' (shipping box, receiver, not sure?). Motor needs work. $300, pick up only, located in Liberty, Missouri.

I don't recall ever seeing an H-H mount like that one, would like to see it with the cover off.
 
  • Like
Reactions: FTA4PA
I don't recall ever seeing an H-H mount like that one, would like to see it with the cover off.
Here you go. lol

 
Here you go. lol

I did 4 AJAX systems that motor was initially made for the first cars that had electric motors, of course, it was made for 12 volts, not 36 volts only issue I had was the weather caused the brush holders on the motor to make them stick and not touch the commutator. I used WD-40 to fix them.
 
Here you go. lol

Thanks for posting that, I remember that thread.

I have 4 or 5 AJAK mounts and they are all different than the eBay dish mount in that the motor is enclosed in the plastic case, you can't see it, but they do look very similar besides that.

I do seem to remember some discussion of there being at least 2 different basic models of AJAK mounts though, a smaller and a bigger one.

Here's a pic of the one I adapted to a 1.8m Prodelin, as well as a couple pics of the master Pendragon's rig.
 

Attachments

  • Sat Prod 1.8 Frame 0n AJAK.JPG
    Sat Prod 1.8 Frame 0n AJAK.JPG
    400.1 KB · Views: 26
  • Sat Prod 1.8 and Ajak Rear Pendragon.jpg
    Sat Prod 1.8 and Ajak Rear Pendragon.jpg
    115.7 KB · Views: 24
  • Sat Prod 1.8 Ajak Mount Dec Adjust Pendragon.jpg
    Sat Prod 1.8 Ajak Mount Dec Adjust Pendragon.jpg
    93.7 KB · Views: 25
  • Like
Reactions: RimaNTSS
Thanks for posting that, I remember that thread.

I have 4 or 5 AJAK mounts and they are all different than the eBay dish mount in that the motor is enclosed in the plastic case, you can't see it, but they do look very similar besides that.

I do seem to remember some discussion of there being at least 2 different basic models of AJAK mounts though, a smaller and a bigger one.

Here's a pic of the one I adapted to a 1.8m Prodelin, as well as a couple pics of the master Pendragon's rig.
Remove the covers show the gears
 
this was my prodelin 180 pole mount for twin KTI engine from AJAK and many others


View: https://www.youtube.com/watch?v=iBX31rvTaTA

that person needs to learn wehn doing H-H elavation ajust is different then a normal dish and the "declination offset" must be played with to get a perfect job

I did it with a 12 foot with KU also just about had a nervous breakdown and it was on a flat roof too and after all that hard work in the damn hot sun its caused my right hip to finally cave in, so I had to wait 6 weeks to get working again only to find out the nightcub was not legal and the police had a huge sign on the front door I got screwed out over $2,500
 
  • Sad
Reactions: madmadworld

Multiple Lnb to Multiple Receivers