Using commercial receivers for recording?

comfortably_numb

Dogs have owners, cats have staff
Original poster
Pub Member / Supporter
Nov 30, 2011
23,017
38,146
New Mexico
I've been using my Edision OS Mini 4K to record TS files, and it does a great job. The issue is it only has one tuner. I would like to be able to record TS files for both C and KU from the same receiver. I then use TSReader to anaylze the streams for bitrate and other modulation parameters, or just to save my recordings with the highest quality possible (ie no transcoding). I've been searching for an OS MIO+ with no success. Then it occurred to me...

I already have an Arris DSR-7403 and an Ericsson RX8200. Both have 4 tuners. Does anybody know if these receivers can record/output TS files? The Arris has ethernet outputs, but it's unclear to me how to utilize those.

Screenshot 2025-11-26 204227.png
 
Last edited:
  • Like
Reactions: primestar31
PS this is related to my previous thread from September about streaming directly from receivers to PC without transcoding. So far it seems only the Edision is capable of this.


Hoping either the Ericsson or Arris could do it, as they are commercial receivers
 
Probably not much help but zipping thru the dsr-7400 HD series op manual it looks like the gige port is industry standard and can be configured to send a ts stream. I don't know.
Have you gone through the gige menu to see if an output selection (asi, .ts) is available?
 

Rest NTSC mode on Octagon SF 8008