Edision mio+ 4K Tuner (?) issue

4Him

Active SatelliteGuys Member
Original poster
Nov 29, 2012
16
0
Italy
Hello everybody,
I'm from Rome, Italy.

I hope someone could help me in this, because I'm going mad.
First of all sorry for my bad english:)

I've Edision Mio 4K+ connected to a H-H Rotor and TNAP 6
Tuner A fails if I switch from a satellite channel to another one of the same (strong) satellite position, in particular from Horizontal to Vertical trasponder.
also It fails if I watch a satellite channel, switch to iptv, return to the original satellite channel.

It happens with various images I've tested.

It does not happen with other enigma2 satellite receiver.

TNAP Enigma2 image has "Tuner driver selector" and you can choose 4 different driver:
It seems it works normally if you choose "No T2-mi driver".
But I need to use the t2-mi ready driver .

I kindly ask for your help because is overall a great receiver but I can't use it in this situation.

Thank you in advance.

Best regards.
 
Hello everybody,
I'm from Rome, Italy.

I hope someone could help me in this, because I'm going mad.
First of all sorry for my bad english:)

I've Edision Mio 4K+ connected to a H-H Rotor and TNAP 6
Tuner A fails if I switch from a satellite channel to another one of the same (strong) satellite position, in particular from Horizontal to Vertical trasponder.
also It fails if I watch a satellite channel, switch to iptv, return to the original satellite channel.

It happens with various images I've tested.

It does not happen with other enigma2 satellite receiver.

TNAP Enigma2 image has "Tuner driver selector" and you can choose 4 different driver:
It seems it works normally if you choose "No T2-mi driver".
But I need to use the t2-mi ready driver .

I kindly ask for your help because is overall a great receiver but I can't use it in this situation.

Thank you in advance.

Best regards.
My experience with TNAP 6 is that it's great with the non-T2MI driver but not so good with the T2MI drivers (missing lots of transponders on blind scans).

Did you try TNAP 5.1? Its T2MI drivers work very well. So my suggestion would be to install TNAP 5.1 in another slot and see if the problem persists, if you have not tried that yet.
 

Any way to get rid of awful Anime image in TNAP?