Edision mio+ 4K Tuner (?) issue

[Brct203]

Can you comment on if using a T2MI driver is needed to scan and receive channels on those transponders?
Before I go blindly trying the different drivers. On 40W I'm getting a channel that shows as 4000 H 5454 3/4 T2MI 103 PID 4096 and in the channel list is 4000H SID 0x320. But just black and no sound. Currently not using a depolarizer but signal shows a strong 11.5 dB.
Because I'm not at the moment using a depol., the same tp shows as V in a blindscan.

the 0x320 service is what I scan in if I use the non-T2MI driver (TNAP 5.1). If I use the T2MI Mod driver, I get TRECE and TRECE+, and they play fine. Note that the other T2MI transponders are a bit weaker

 

[4Him]

Last question please
In tnap6 there is "tuner driver selector" plugin.
I can t find it in Tnap 5.1
Could you help me please?

 

[cyberham]

That plugin was introduced with TNAP6. It isn't in earlier images.

 

[Brct203]

Last question please
In tnap6 there is "tuner driver selector" plugin.
I can t find it in Tnap 5.1
Could you help me please?

in TNAP 5.1 and prior, you'll find the T2MI driver under Menu - Plugins - Downloads - Extra, select teh t2mi-module, that will install it and will reboot the system.

you can check what driver the system is running by going to Menu - Information - About, second page

by the way, just curious, what satellite are you receiving that has T2MI?