Bear in mind that a lot of HF radio is vertically polarized so the antennas aren't well-suited to attic installation.
I don't have the MIO, so I don't have theDoes someone have a screenshot handy of the SDR program running on an OS Mio?
I can do this and have...When in the Sdr Plugin, Press the Red Button to swap between modes (FM, NFM, LSB, USB, AM, DAB)..
All this does for me, is increase or decrease the frequency up or downPress CH +/- to allow kc tuning resolution for NFM, AM, SSB..
This works, but only the FM is good to me. AM, if I new the correct number to use for say 940 AM, maybe I could get it to work? I have tried 0.9400; 9.4; 94.0; 940.0 and none have worked? I haven't tried any of the other modulations yet...Press Green to save current Frequency and mode to the selected memory..
The 6th screenshot in my above post, is my MENU page. As you can see it's very different from yours? Basically there is nothing to save, or change really?Press Menu to enter settings screen, Green to save settings.
AbsolutelyRich people.
Thanks for the screenshots. Is that 1TB solid state drive internally mounted or do you have to hang it off the back?I don't have the MIO, so I don't have the
TNAP image to play with. I'm using an Octagon sf4008 with the SatDreamGR 6 image, after seeing Brian's screenshots I can see the TNAP image is more loaded than the SatDreamGR 6 image? So far I've only been able to listen to FM local stations.
...
Hope this is some use to anyone..!!!!
Al
Yep, the RTL-SDR is $20... LOLRich people.
It's inside of the sf4008Thanks for the screenshots. Is that 1TB solid state drive internally mounted or do you have to hang it off the back?
This works, but only the FM is good to me. AM, if I new the correct number to use for say 940 AM, maybe I could get it to work? I have tried 0.9400; 9.4; 94.0; 940.0 and none have worked? I haven't tried any of the other modulations yet...
This one referenced earlier by primestar31 supports direct sampling and goes down to 500 KHz:The common RTL SDR devices don't tune down low enough to receive AM broadcasts. (Unless you have one that's been modified to support direct sampling, *and* the software supports it.)
Correct, the Enigma2 Radio plugin on the mio 4k supports the ability to enable direct sampling with the RTL-SDR Blog model dongle. No downconverter is necessary with this specific dongle to tune down to AM broadcast band if Direct Sampling is enabled in the menu.This one referenced earlier by primestar31 supports direct sampling and goes down to 500 KHz:
Amazon product ASIN B0129EBDS2
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?