This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Service Restored to 129 Satellite!

It appears that they are presently adjusting the power of each spotbeam transponder--probably fine tuning for satellite power management and to ensure non-interference between spotbeams.
 

I'm sure there were many. I remember the guy that spent over an hour and a half at my house for a 10 minute job. I already had the cables for 722k install to the location (OTA, TV2 backfeed, SAT, CAT5, etc). All he was supposed to do was plug it in and activate. But the receiver wouldn't communicate over the CAT5...my other 722 wouldn't either. It was dish's issue, but he sat there on the phone trying to get his communication screen so he could take a picture.
 
So does this require a machine reboot or a switch test to get all my channels back?
 
no locals in HD in MN yet. 129 siganl is really weak. Dish chat just responds with we are aware and working on it with no other explanation.
Oh well atleast we got most HD channels back online.
 
Got everything back except locals in Vegas.
How many other non-sat forums have you seen this 129 failure show up on? There are threads on at least 3 other non-sat related forums I frequent. Pretty amazing.
 
So does this require a machine reboot or a switch test to get all my channels back?

If you did a switch test last night when 129 was down then yes, you will need to do it again to get it back. If you didn't fool with things trying to fix it then you don't have to fix anything you broke last night.
 
If you did a switch test last night when 129 was down then yes, you will need to do it again to get it back. If you didn't fool with things trying to fix it then you don't have to fix anything you broke last night.

Unless you clicked "cancel" instead of PROCEED or SAVE at the end of the check switch - if you got a message that said something like fewer satellites were found than you previously had. Correct?
 
HD's are back except locals still.... did a check switch and still nothing.

Same with me - no Charlotte DMA HDs were available when I left home at 7 this morning. I made sure I edited my DVR timers to record the SD locals or OTA before I left the house.