Comments from a newbie to FTA

[cyberham]

Gotta take a look at that when I get home from work!...

Me too. 89W is pretty dull now with no active tps after the weekend is over.

 

[cyberham]

Low symbol rate finds on C-band. All of these were located using a V9 Prime with the T2MI toggle "ON."

97- 4022 V 373

97- 4050 V 444

After a few seconds, each of these tps locked at SQ 66% and 77/79% respectively. But I can't scan either in. I tried varying the frequencies a MHz or two but that didn't help. I'll try later in the day when signals typically get stronger.

 

[comfortably_numb]

After a few seconds, each of these tps locked at SQ 66% and 77/79% respectively. But I can't scan either in. I tried varying the frequencies a MHz or two but that didn't help. I'll try later in the day when signals typically get stronger.

I didn't scan in any feeds on those two either, but I suspect adding a "User channel" using the APIDS from the PDF would work on the Amiko h.265 with Hyper Casey special firmware. I just haven't tried it yet.

 

[cyberham]

... I suspect adding a "User channel" using the APIDS from the PDF would work on the Amiko h.265 with Hyper Casey special firmware...

I tried entering each APID into the V9 for these two frequencies but couldn't play any.