Comments from a newbie to FTA

[cyberham]

Gotta take a look at that when I get home from work!...

Me too. 89W is pretty dull now with no active tps after the weekend is over.

 

[cyberham]

Low symbol rate finds on C-band. All of these were located using a V9 Prime with the T2MI toggle "ON."

97- 4022 V 373

97- 4050 V 444

After a few seconds, each of these tps locked at SQ 66% and 77/79% respectively. But I can't scan either in. I tried varying the frequencies a MHz or two but that didn't help. I'll try later in the day when signals typically get stronger.

 

[comfortably_numb]

After a few seconds, each of these tps locked at SQ 66% and 77/79% respectively. But I can't scan either in. I tried varying the frequencies a MHz or two but that didn't help. I'll try later in the day when signals typically get stronger.

I didn't scan in any feeds on those two either, but I suspect adding a "User channel" using the APIDS from the PDF would work on the Amiko h.265 with Hyper Casey special firmware. I just haven't tried it yet.

 

[cyberham]

... I suspect adding a "User channel" using the APIDS from the PDF would work on the Amiko h.265 with Hyper Casey special firmware...

I tried entering each APID into the V9 for these two frequencies but couldn't play any.

 

[comfortably_numb]

I used the Amiko to manually program in some of the Westwood One syndicated radio channels on 105 C. I remember hearing these are going away soon (hope that isn't true).

The Amiko works great for radio.

 

[comfortably_numb]

Listening to the low SR WPR mux (12027 V 360) on the Amiko.

Program in the TP in the settings, let it lock, then add "User Channels" for each feed with APID's 4097, 4098, and 4099.

Thanks again Hyper Casey for making this possible on this very solid receiver.

There have been no signal drop-out's at all.